Velbon Dolly Pod Dock for Magliner（DPD-MG)

SOLD OUT

● Precautions before purchasing

This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing.

3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden.

Only those who understand the 3D -printed products or handmade products as described above should order.



● Product explanation

This is a dock for Magliner that can hold an Velbon Dolly Pod.

You can also take it apart, attach the super clamps.

Designed it based on the Velbon Dolly Pod DP-83S that is mainstream in Japan.

[upper “grip” ]
28-32mm grip for Velbon Dolly Pod DP-83S

[lower “base”]
base for Velbon Dolly Pod DP-83S

It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Dolly Pod to the base:)

The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE.



●Package contents (The first photo is the content)
＊ Super clamps are not included

1 - DPD-1
This grip can hold stands with a diameter of approximately 28-32mm.

1-Mini Magliner adapter for DPD-1
(x2) Magliner adapter
(x4) M5 bolts
(x1) 1/4inch bolt for bottom

2 - screw and bolt pack
(x2) stainless steel 1/4-20 screws
(x4) stainless steel M5-15mm bolts

2 - Rubber-like spacer with 3 holes