Boom & Umbrella Dock for Olympia carts （BUD-OL) STANDARD SET Two mounting screws

● Precautions before purchasing

This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing.

3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden.

Only those who understand the 3D -printed products or handmade products as described above should order.



● Product explanation
This is a boom & umbrella dock that can be attached to an Olympia cart. Also, it is a boom & umbrella dock that can be fixed with a super clamp. It is possible to connect to the side and install booms side by side.

https://www.instagram.com/reel/DM2dwQSPaZw/?igsh=eGd4ZHF2bnY1YWR1
https://www.instagram.com/reel/DM5EPX4vWeB/?igsh=enZjMG0weWxxanFx

Super clamps can be fixed not only in the horizontal but also vertically. If you fix it horizontal, you can fix it with two M5 bolts and one 1/4 inch screw. If you fix it vertically, remove the non -slip rubber like sheet and you can fix it with one 1/4 inch screw.

https://www.instagram.com/reel/C94U2EevdWI/?igsh=MWQ0bG9jNTlidHpzYw==

The lower base part has a structure that does not accumulate water such as rain, making it easy to clean.

The whole material uses weather resistance and durable ASA, and the grip uses high -quality and durable TPE.

It is currently difficult to obtain ASA materials in a stable manner, and since the filament manufacturers available vary depending on the production period, the way black materials look slightly different.


●Package contents (The first photo is the content)

＊ Super clamps are not included

1 - upper “grip” with black clamp and orange safety lock
This grip can hold stands with a diameter of approximately 32-36mm.

1 - lower “base”

2 - Rubber-like spacer with 3 holes

1 - screw and bolt pack
(x2) stainless steel 1/4-20 screws,
(x4) stainless steel M5-15mm bolts

1 - Olympia adapter for BUD-1 & LSD-1 / Two mounting screws
Can be fixed to 3.5mm thick edges
(x1) Olympia upper adapter with two mounting screws
(x1) Olympia bottom adapter with two mounting screws
(x4) stainless steel M5-25mm bolts
(x4) stainless steel M5 nuts
(x1) Wedge spacer set