Velbon Dolly Pod Dock for Olympia carts （DPD-OL) / Two mounting screws

SOLD OUT

● Precautions before purchasing

This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing.

3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden.

Only those who understand the 3D -printed products or handmade products as described above should order.



● Product explanation

This is a dock for Olympia carts that can hold an Velbon Dolly Pod.

https://www.instagram.com/reel/DNaik4Qvgkp/?igsh=MWJtam91aGwycjZzNw==
https://www.instagram.com/reel/DPv4vQgEm8d/?igsh=bjkyNHo1cXZlMGt2

You can also take it apart, attach the super clamps.

Designed it based on the Velbon Dolly Pod DP-83S that is mainstream in Japan.

It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Dolly Pod to the base:)

The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE.



●Package contents (The first photo is the content)
＊ Super clamps are not included

1 - Dolly Pod Dock（DPD-1）
This grip can hold stands with a diameter of approximately 28-32mm.
[upper “grip” & extension parts ]
28-32mm grip for Velbon Dolly Pod DP-83S
[lower “base”]
base for Velbon Dolly Pod DP-83S

1 - screw and bolt pack
(x2) stainless steel 1/4-20 screws
(x4) stainless steel M5-15mm bolts

2 - Rubber-like spacer with 3 holes

1 - Olympia adapter for DPD-1 / Two mounting screws
Can be fixed to 3.5mm thick edges
(x1) upper Olympia adapter with two mounting screws
(x1) long Olympia adapter with two mounting screws (This allows you to adjust the mounting height.)
(x4) stainless steel M5-25mm bolts
(x1) stainless steel 1/4"-25mm bolts
(x2) stainless steel M5-15mm bolts
(x1) stainless steel 1/4"-16mm bolts
(x4) stainless steel M5 nuts
(x1) stainless steel 1/4" nuts