Avenger Roller Stand Dock for INOVATIV（RSD-IN)

International shipping available

● Precautions before purchasing

This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing.

3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden.

Only those who understand the 3D -printed products or handmade products as described above should order.



● Product explanation

This is a dock for INOVATIV that can hold an Avenger Roller Stand (Avenger A5017).
With a different adapter, it can be mounted to other carts such as Magliner and Tilta Boulder as well.
The range where the dock can be mounted is indicated by the blue line in the photo.

[upper “grip” ]
32-36mm grip for Avenger Roller Stand (Avenger A5017)

[lower “base”]
base for Avenger Roller Stand (Avenger A5017)

It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Avenger Roller Stand to the base:)

The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE.


●Package contents (The first photo is the content. The setup shown in the photo uses the items listed below.)

1 - RSD-1
[upper “grip” & extension parts ]
32-36mm grip for Avenger Roller Stand (Avenger A5017)
[lower “base”]
base for Avenger Roller Stand (Avenger A5017)


(x4) M5 bolts
(x1) 1/4inch bolt for bottom


1-Mini INOVATIVr adapter for RSD-1
(x2) Mini INOVATIV adapter


1- (x1) Wedge spacer set