● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation This is a dock for INOVATIV that can hold an Avenger Roller Stand (Avenger A5017). With a different adapter, it can be mounted to other carts such as Magliner and Tilta Boulder as well. The range where the dock can be mounted is indicated by the blue line in the photo. [upper “grip” ] 32-36mm grip for Avenger Roller Stand (Avenger A5017) [lower “base”] base for Avenger Roller Stand (Avenger A5017) It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Avenger Roller Stand to the base:) The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE. ●Package contents (The first photo is the content. The setup shown in the photo uses the items listed below.) 1 - RSD-1 [upper “grip” & extension parts ] 32-36mm grip for Avenger Roller Stand (Avenger A5017) [lower “base”] base for Avenger Roller Stand (Avenger A5017) (x4) M5 bolts (x1) 1/4inch bolt for bottom 1-Mini INOVATIVr adapter for RSD-1 (x2) Mini INOVATIV adapter 1- (x1) Wedge spacer set

Improved Structure from CSD-1 CSD-1からさらに進化 Compared to the previous CSD-1 model, the locking section has been structurally reinforced for increased strength and stability. The locking mechanism has also been redesigned for smoother and easier release during operation. Built stronger. Operates smoother. 従来モデルCSD-1と比較し、ロック部の構造を全体的に強化。 より高い強度と安定性を実現しました。 さらに、ロック解除もよりスムーズに行える設計へと改良しています。 より強く、よりスムーズに。 ● Precautions Before Purchasing ● ご購入前の注意事項 This product is made from 3D-printed resin, not metal.
If you are expecting metal-like strength, rigidity, or surface finish, please refrain from purchasing. Due to the nature of 3D printing, minor layer lines, small surface marks, or slight burrs may be visible.
Unlike injection-molded products, 3D-printed items may not have a perfectly smooth or uniform finish. The product has been tested and verified for normal professional use. However, please avoid excessive loads, strong impacts, or improper handling. Please purchase only if you understand and accept the characteristics of 3D-printed and handmade products. 本製品は金属製ではなく、3Dプリント樹脂製です。
金属のような強度・剛性・仕上がりを期待される方はご購入をお控えください。 3Dプリント製品の特性上、積層痕・細かな表面傷・わずかなバリが見られる場合があります。
射出成形品のような完全に滑らかで均一な仕上がりではありません。 通常の撮影用途での強度確認は行っておりますが、過度な荷重や強い衝撃、不適切な使用はお避けください。 3Dプリント製品およびハンドメイド製品の特性をご理解いただける方のみご購入をお願いいたします。 

● Product Description ● 商品説明
 The C-Stand Dock is a holder designed to secure and store C-Stands using Super Clamps. Multiple docks can be connected side-by-side, allowing several C-Stands to be stored efficiently while saving space. To hold one C-Stand, you will need one C-Stand Dock and two Super Clamps. A typical C-Stand weighs approximately 5–10 kg (11–22 lbs), while most Super Clamps have a maximum load capacity of 15 kg (33 lbs). When connecting multiple docks together, always ensure that the total load does not exceed the rated capacity of the Super Clamps being used. This product was designed around the Avenger C-Stand, which is widely used in Japan. The lower dock is designed not only to hold a C-Stand, but also items such as boom poles and umbrellas. Please note that some Turtle Base C-Stands have protrusions on the underside of the base, which may interfere with the current design. By replacing the Super Clamps with cart-specific adapters, the dock can also be mounted to the edge of carts such as Magliner and Inovativ carts. C-Stand Dockは、Super Clampを使用してCスタンドを固定・収納するためのホルダーです。ドック同士を横方向に連結できるため、複数のCスタンドを省スペースで効率よく収納できます。 Cスタンド1本を保持するには、C-Stand Dock 1個とSuper Clamp 2個が必要です。一般的なCスタンドの重量は約5〜10kgで、多くのSuper Clampの耐荷重は15kgです。複数のドックを連結して使用する場合は、必ず使用するSuper Clampの耐荷重を超えない範囲でご使用ください。 本製品は、日本で広く使用されているAvenger製Cスタンドを基準に設計されています。下部ドックは、Cスタンドだけでなくブームポールやアンブレラなども置けるように設計されています。 なお、一部のTurtle BaseタイプのCスタンドはベース下面に突起があり、現行モデルでは干渉する場合があります。 また、Super Clampの代わりにカート専用アダプターを使用することで、MaglinerやInovativなどのカートの天板の縁へ取り付けることも可能です。 Upper Dock ("Grip") 
上部ドック（Grip） Super Clamps can be mounted either horizontally or vertically. Horizontal Mounting Secure the dock using: * Included rubber pad * Two M5 bolts * One 1/4"-20 screw Vertical Mounting Secure the dock using: * One 1/4"-20 screw The included rubber pad is not required for vertical mounting. The upper docks can also be connected side-by-side using a single M5 bolt. Optional spacers can be inserted between docks to prevent adjacent grips from interfering with one another. Super Clampは横向き・縦向きのどちらでも取り付けることができます。 横向き取り付け 以下を使用して固定します。 * 付属ラバーシート * M5ボルト ×2 * 1/4"-20ネジ ×1 縦向き取り付け 以下を使用して固定します。 * 1/4"-20ネジ ×1 縦向き取り付けの場合、付属ラバーシートは使用しません。 上部ドック同士はM5ボルト1本で連結できます。また、必要に応じてスペーサーを挟むことで、隣接するグリップ部同士の干渉を防ぐことができます。 Lower Dock ("Base") 
下部ドック（Base） The lower dock allows the C-Stand base to be positioned in multiple 90-degree orientations. For safety, the lower dock must always be secured using: * One 1/4"-20 screw * Two M5 bolts All three fasteners must be installed. Do not mount the lower dock using only one or two fasteners. Multiple lower docks can also be connected side-by-side using two M5 bolts. Optional spacers can be used to provide additional clearance and prevent interference between neighboring stands. Because the dock is made from resin, repeated installation and removal may gradually cause wear over time. Please handle and install your C-Stands carefully. 下部ドックは、Cスタンドの脚部を90度ごとの異なる向きで設置できます。 安全のため、下部ドックは必ず以下の3点で固定してください。 * 1/4"-20ネジ ×1 * M5ボルト ×2 3本すべての固定具を使用してください。1本または2本のみで固定しないでください。 下部ドック同士もM5ボルト2本で横方向に連結できます。スペーサーを使用することで、隣接するスタンド同士の干渉を防ぎ、十分なクリアランスを確保できます。 本製品は樹脂製のため、着脱を繰り返すことで接触部分が徐々に摩耗する場合があります。Cスタンドの取り付け・取り外しは丁寧に行ってください。 ●Reference video ●参考動画 https://www.instagram.com/reel/C8MLhftvYW7/?igsh=YjBmNHcwYzFlcjl2 
https://www.instagram.com/reel/C8HB8bqPbE4/?igsh=eXZpcm81dWx4aG4z https://www.instagram.com/reel/C946jeDP3YR/?igsh=MWtvenRnb3N2OWZmcA== https://www.instagram.com/reel/C95GFm8vNFp/?igsh=dTN5eWR0MDVlbnNx https://www.instagram.com/reel/C-r-e2cvWUJ/?igsh=amVkZHl4ampzY3Bx ●Materials 
●材質 The main body is manufactured from ASA, a durable and weather-resistant material. The grip insert is made from high-quality TPE, providing excellent durability while helping to protect your equipment. Please note that ASA filament availability varies over time, and different filament manufacturers may be used depending on the production period. As a result, the appearance of black parts may vary slightly between production batches. 本体には耐候性・耐久性に優れたASA樹脂を使用しています。 グリップ部には高品質なTPEを使用しており、機材を保護しながら優れた耐久性を実現しています。 ASAフィラメントは時期によって入手状況が変動し、製造ロットごとに使用するメーカーが異なる場合があります。
そのため、ブラックカラーであっても生産ロットによって色味が若干異なる場合があります。 ●Package contents (The first photo is the content. The setup shown in the photo uses the items listed below.) ● 同梱内容（1枚目の写真が内容物です。写真の構成には下記のアイテムを使用しています。） Super clamps are NOT included. • 1 × Upper “Grip” (for approx. 32–36mm pole)
 • 1 × Lower “Base”
 • 1 × Screw & Bolt Pack 　
 – (x2) Stainless steel 1/4-20 screws
 　– (x4) Stainless steel M5 × 15mm bolts
 • 2 × Rubber-like sheets ※スーパークランプは付属しません。 ・上部「グリップ」×1（対応径 約32–36mm） 
・下部「ベース」×1
 ・ネジ・ボルトセット ×1
  　– ステンレス 1/4-20 ネジ ×2
  　– ステンレス M5 ×15mm ボルト ×4
 ・ラバーシート ×2
 ●Disclaimer ●免責事項 * Always verify that all screws, bolts, clamps, and adapters are properly secured before use. * Do not exceed the rated load capacity of the Super Clamp, adapter, cart, or any other supporting equipment. * Users are solely responsible for ensuring proper installation and safe operation of this product. * Inspect the product regularly for wear, damage, or deformation. Discontinue use immediately if any defects are found. * Because this product is manufactured from plastic materials, normal wear may occur over time through repeated use. * MOTT shall not be liable for any injury, equipment damage, property damage, or loss resulting from improper installation, misuse, modification, overloading, or failure to inspect the product before use. * Use this product at your own risk. * 使用前に、すべてのネジ、ボルト、クランプ、アダプターが確実に固定されていることを確認してください。 * Super Clamp、アダプター、カート、およびその他の支持機材の耐荷重を超えて使用しないでください。 * 本製品の取り付けおよび使用に関する安全管理は、使用者の責任において行ってください。 * 使用前および定期的に、本製品に摩耗・変形・破損がないか点検してください。異常が認められた場合は直ちに使用を中止してください。 * 本製品は樹脂製のため、通常使用においても経年劣化や摩耗が発生する場合があります。 * 不適切な取り付け、誤使用、改造、過積載、または点検不足によって生じた人身事故、機材損傷、物損、その他いかなる損害についても、MOTTは責任を負いかねます。 * 本製品は使用者の責任においてご使用ください。

● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation This is a dock for Magliner that can hold an Avenger Roller Stand (Avenger A5017). With a different adapter, it can be mounted to other carts such as INOVATIV and Tilta Boulder as well. [upper “grip” ] 32-36mm grip for Avenger Roller Stand (Avenger A5017) [lower “base”] base for Avenger Roller Stand (Avenger A5017) It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Avenger Roller Stand to the base:) The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE. ●Package contents (The first photo is the content. The setup shown in the photo uses the items listed below.) 1 - RSD-1 [upper “grip” & extension parts ] 32-36mm grip for Avenger Roller Stand (Avenger A5017) [lower “base”] base for Avenger Roller Stand (Avenger A5017) [Mini lower “base” for Velbon Dolly Pod] The lower “base” for securing the pod to the handle side of the Magliner ＊This is designed to mount to the side of the handle on older-generation Magliners using the Mini Magliner Adapter, rather than the current Magliner model. (x4) M5 bolts (x1) 1/4inch bolt for bottom 1-Mini Magliner adapter for RSD-1 (x2) Magliner adapter 1- (x1) Wedge spacer set ●Disclaimer ●免責事項 * Always verify that all screws, bolts, clamps, and adapters are properly secured before use. * Do not exceed the rated load capacity of the Super Clamp, adapter, cart, or any other supporting equipment. * Users are solely responsible for ensuring proper installation and safe operation of this product. * Inspect the product regularly for wear, damage, or deformation. Discontinue use immediately if any defects are found. * Because this product is manufactured from plastic materials, normal wear may occur over time through repeated use. * MOTT shall not be liable for any injury, equipment damage, property damage, or loss resulting from improper installation, misuse, modification, overloading, or failure to inspect the product before use. * Use this product at your own risk. * 使用前に、すべてのネジ、ボルト、クランプ、アダプターが確実に固定されていることを確認してください。 * Super Clamp、アダプター、カート、およびその他の支持機材の耐荷重を超えて使用しないでください。 * 本製品の取り付けおよび使用に関する安全管理は、使用者の責任において行ってください。 * 使用前および定期的に、本製品に摩耗・変形・破損がないか点検してください。異常が認められた場合は直ちに使用を中止してください。 * 本製品は樹脂製のため、通常使用においても経年劣化や摩耗が発生する場合があります。 * 不適切な取り付け、誤使用、改造、過積載、または点検不足によって生じた人身事故、機材損傷、物損、その他いかなる損害についても、MOTTは責任を負いかねます。 * 本製品は使用者の責任においてご使用ください。

● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation Designed for real on-set workflow, the Utility Anchor provides a reliable point to hang, clip, and organize your essential gear. From Carabiner Wedge to headphones and small accessories, everything stays within reach — exactly where you need it. Not just a hook. A central anchor point for your setup. • Supports carabiners, hooks, and direct hanging • Ideal for headphones, tools, and everyday gear • Compact, durable, and easy to integrate into your cart • Designed for ROBOCUP ●Package contents (The first photo is the content) *Please note: mounting strap is not included. 1 - Utility Anchor for ROBOCUP

● Precautions Before Purchasing ● ご購入前の注意事項 EN This product is made from 3D-printed resin, not metal. If you are expecting metal-like strength, rigidity, or surface finish, please refrain from purchasing. Due to the nature of 3D printing, minor layer lines, small surface marks, or slight burrs may be visible. Unlike injection-molded products, 3D-printed items may not have a perfectly smooth or uniform finish. The product has been tested and verified for normal professional use. However, please avoid excessive loads, strong impacts, or improper handling. Please purchase only if you understand and accept the characteristics of 3D-printed and handmade products. JP 本製品は金属製ではなく、3Dプリント樹脂製です。 金属のような強度・剛性・仕上がりを期待される方はご購入をお控えください。 3Dプリント製品の特性上、積層痕・細かな表面傷・わずかなバリが見られる場合があります。 射出成形品のような完全に滑らかで均一な仕上がりではありません。 通常の撮影用途での強度確認は行っておりますが、過度な荷重や強い衝撃、不適切な使用はお避けください。 3Dプリント製品およびハンドメイド製品の特性をご理解いただける方のみご購入をお願いいたします。 ● Product Description ● 商品説明 EN A carabiner-shaped wedge designed for professional film and photo production. This versatile tool helps eliminate wobble and stabilize equipment such as apple boxes, hi-hats, tripods, carts, and other on-set gear. The integrated carabiner-style design allows you to easily hook it onto carts, stands, or belts for quick access during fast-paced shoots. Lightweight yet durable, it’s built to handle everyday professional use on set. Small tool. Big difference. JP 撮影現場のために設計された、カラビナ形状のくさびです。 アップルボックス、ハイハット、三脚、カートなどのガタつきを抑え、機材の安定性を向上させます。 カラビナ形状により、カートやスタンド、ベルトなどに素早く引っ掛けることができ、現場での素早いアクセスが可能です。 軽量ながらプロユースに耐える強度を確保しています。 小さなツールが、大きな違いを生みます。 ●Dimensions 　Approx.　150mm x 30mm x16mm ●Package contents (The first photo is the content) (x4) Carabiner Wedges

This item is fully functional, but has cosmetic imperfections due to the nature of 3D printing. These products are not sold as standard items because of visible variations such as: Surface inconsistencies or layer line variations Minor scratches or scuffs Stringing or slight deformation Color variations due to printing conditions All items are carefully inspected to ensure that these imperfections do not affect performance or durability. For this reason, they are offered at a discounted price. Please note: The condition varies from item to item and cannot be selected. Returns or exchanges based on cosmetic appearance are not accepted. 本商品は、機能には問題ありませんが、 3Dプリント特有の外観上の個体差や仕上がり不良があるため、 通常品として販売していない製品です。 以下のような状態が含まれる場合があります： ・表面のムラや積層跡のばらつき ・細かなキズ、スレ ・糸引きやわずかな変形 ・色味の差やプリント条件による個体差 いずれも使用上の強度・機能には影響がない範囲で選別しています。 そのため、通常品よりも価格を抑えて販売しております。 ※外観の状態は個体ごとに異なり、選択はできません。 ※外観を理由とした返品・交換はお受けできませんのでご了承ください。 ● Precautions before purchasing This product is made from 3D-printed resin, not metal. If you are expecting metal-like strength or finish, please refrain from purchasing. Due to the nature of 3D printing, layer lines, minor surface marks, or small burrs may be present. Fine scratches may also occur during the manufacturing process. Compared to injection-molded resin products, 3D-printed items generally have a more handcrafted appearance. The strength of this product has been tested and confirmed for normal use. However, please avoid excessive force, impact, or improper use, as this may cause damage. We kindly ask that only customers who understand and accept the characteristics of 3D-printed and handmade products place an order. ● Product explanation This compact trash can can be mounted to a V-lock just like a V-mount battery. Since the V-lock system is widely used in camera and lighting equipment, it can be attached in many different places on set. The V-lock mount allows for quick and easy attachment and removal, making trash disposal fast and hassle-free during shoots. https://www.instagram.com/reel/DUDZwL3Eug-/?igsh=dnA5bWx1b3dzZHU5 We have confirmed the installation with many V-mounts, but there may be some wobbling depending on the receiving side of the V-lock. Checked V-mount list ・SmallRig Mini V-Lock Assembly Kit MD2801B ・SmallRig Mini V Mount Battery Plate 2987 ●Dimensions 　Approx.　100mm x 85mm x 140mm ●Package contents (The first photo is the content) V-lock Trash Can

Improved Structure from BUD-1 BUD-1からさらに進化 Compared to the previous BUD-1 model, the locking section has been structurally reinforced for increased strength and stability. The locking mechanism has also been redesigned for smoother and easier release during operation. Built stronger. Operates smoother. 従来モデルBUD-1と比較し、ロック部の構造を全体的に強化。 より高い強度と安定性を実現しました。 さらに、ロック解除もよりスムーズに行える設計へと改良しています。 より強く、よりスムーズに。 ● Precautions Before Purchasing ● ご購入前の注意事項 This product is made from 3D-printed resin, not metal.
If you are expecting metal-like strength, rigidity, or surface finish, please refrain from purchasing. Due to the nature of 3D printing, minor layer lines, small surface marks, or slight burrs may be visible.
Unlike injection-molded products, 3D-printed items may not have a perfectly smooth or uniform finish. The product has been tested and verified for normal professional use. However, please avoid excessive loads, strong impacts, or improper handling. Please purchase only if you understand and accept the characteristics of 3D-printed and handmade products. 本製品は金属製ではなく、3Dプリント樹脂製です。
金属のような強度・剛性・仕上がりを期待される方はご購入をお控えください。 3Dプリント製品の特性上、積層痕・細かな表面傷・わずかなバリが見られる場合があります。
射出成形品のような完全に滑らかで均一な仕上がりではありません。 通常の撮影用途での強度確認は行っておりますが、過度な荷重や強い衝撃、不適切な使用はお避けください。 3Dプリント製品およびハンドメイド製品の特性をご理解いただける方のみご購入をお願いいたします。 ● Product Description ● 商品説明 This boom & umbrella dock is designed to be mounted using a super clamp. Multiple units can be connected side-by-side, allowing efficient parallel mounting of multiple booms. The super clamp can be mounted both horizontally and vertically. • Horizontal mounting:
Secure using the included rubber-like sheet, two M5 bolts, and one 1/4-20 screw. • Vertical mounting:
Secure using one 1/4-20 screw without the included rubber-like sheet. Side expansion is possible using one M5 bolt.
By inserting a spacer, interference between adjacent grips can be prevented. The lower base features a drainage-friendly structure that helps prevent rainwater accumulation and allows for easy cleaning. 本製品はスーパークランプで固定できるブーム＆アンブレラドックです。 複数個を側面連結することで、ブームを横並びに効率よく設置できます。 スーパークランプは横向き・縦向きの両方に対応しています。 • 横向き固定の場合
付属のラバーシート、M5ボルト2本、1/4-20ネジ1本で固定します。 • 縦向き固定の場合
付属のラバーシートを使用せず、1/4-20ネジ1本で固定します。 側面連結はM5ボルト1本で可能です。
スペーサーを挿入することで、隣接するグリップ同士の干渉を防げます。 下部ベースは雨水が溜まりにくい排水構造を採用し、清掃しやすい設計になっています。 Two Editions. Two Purposes. 2つのエディション、それぞれの役割。 This product is available in two material editions, designed for different production environments. Choose the edition that best matches your shooting style and working conditions. 本製品は、撮影環境に応じて選べる2つの素材エディションをご用意しています。 ご自身の撮影スタイルや使用環境に合わせてお選びください。 ◾️Studio（ Indoor Edition） – PETG スタジオ（インドアエディション） – PETG For visual-focused indoor setups.
 見た目と扱いやすさを重視した屋内向けモデル Designed for studio and indoor production environments. • Excellent impact resistance for everyday use
 • Lightweight and easy to handle
 • Refined, metal-like appearance for a clean, professional look 
• Ideal for controlled environments such as studios Best suited for indoor use.
Please avoid prolonged exposure to high temperatures or direct sunlight. A balance of durability and premium aesthetics. スタジオや屋内撮影環境向けに設計。 ・日常使用に十分な耐衝撃性
・軽量で扱いやすい
 ・金属のような質感を持つ洗練された外観
 ・スタジオなど管理された環境に最適 屋内使用を前提とした設計です。
高温環境や直射日光下での長時間使用はお避けください。 耐久性と美しい外観のバランスモデル。 ◾️Pro（Outdoor Edition） – ASA プロ（アウトドアエディション） – ASA For demanding environments and outdoor production.
 過酷な環境や屋外撮影に対応するプロ仕様モデル Engineered for outdoor production and high-temperature environments. • Superior heat resistance 
• Excellent weather durability
 • More resilient under harsh conditions 
• Built for professional field use Designed to perform where reliability matters most. 屋外撮影や高温環境を想定した設計。 ・優れた耐熱性
・高い耐候性
 ・過酷な環境下でも安定した性能 
・現場重視のプロフェッショナル仕様 信頼性が求められる環境で力を発揮します。 ● Package Contents ● 同梱内容 Super clamps are NOT included. • 1 × Upper “Grip” (for approx. 32–36mm pole)
 • 1 × Lower “Base”
 • 1 × Screw & Bolt Pack 　
 – (x2) Stainless steel 1/4-20 screws
 　 – (x4) Stainless steel M5 × 15mm bolts
 • 2 × Rubber-like sheets ※スーパークランプは付属しません。 ・上部「グリップ」×1（対応径 約32–36mm） 
・下部「ベース」×1
 ・ネジ・ボルトセット ×1
  　– ステンレス 1/4-20 ネジ ×2
  　– ステンレス M5 ×15mm ボルト ×4
 ・ラバーシート ×2

Improved Structure from BUD-1 BUD-1からさらに進化 Compared to the previous BUD-1 model, the locking section has been structurally reinforced for increased strength and stability. The locking mechanism has also been redesigned for smoother and easier release during operation. Built stronger. Operates smoother. 従来モデルBUD-1と比較し、ロック部の構造を全体的に強化。 より高い強度と安定性を実現しました。 さらに、ロック解除もよりスムーズに行える設計へと改良しています。 より強く、よりスムーズに。 ● Precautions Before Purchasing ● ご購入前の注意事項 This product is made from 3D-printed resin, not metal.
If you are expecting metal-like strength, rigidity, or surface finish, please refrain from purchasing. Due to the nature of 3D printing, minor layer lines, small surface marks, or slight burrs may be visible.
Unlike injection-molded products, 3D-printed items may not have a perfectly smooth or uniform finish. The product has been tested and verified for normal professional use. However, please avoid excessive loads, strong impacts, or improper handling. Please purchase only if you understand and accept the characteristics of 3D-printed and handmade products. 本製品は金属製ではなく、3Dプリント樹脂製です。
金属のような強度・剛性・仕上がりを期待される方はご購入をお控えください。 3Dプリント製品の特性上、積層痕・細かな表面傷・わずかなバリが見られる場合があります。
射出成形品のような完全に滑らかで均一な仕上がりではありません。 通常の撮影用途での強度確認は行っておりますが、過度な荷重や強い衝撃、不適切な使用はお避けください。 3Dプリント製品およびハンドメイド製品の特性をご理解いただける方のみご購入をお願いいたします。 ● Product Description ● 商品説明 This boom & umbrella dock is designed to be mounted using a super clamp. Multiple units can be connected side-by-side, allowing efficient parallel mounting of multiple booms. The super clamp can be mounted both horizontally and vertically. • Horizontal mounting:
Secure using the included rubber-like sheet, two M5 bolts, and one 1/4-20 screw. • Vertical mounting:
Secure using one 1/4-20 screw without the included rubber-like sheet. Side expansion is possible using one M5 bolt.
By inserting a spacer, interference between adjacent grips can be prevented. The lower base features a drainage-friendly structure that helps prevent rainwater accumulation and allows for easy cleaning. 本製品はスーパークランプで固定できるブーム＆アンブレラドックです。 複数個を側面連結することで、ブームを横並びに効率よく設置できます。 スーパークランプは横向き・縦向きの両方に対応しています。 • 横向き固定の場合
付属のラバーシート、M5ボルト2本、1/4-20ネジ1本で固定します。 • 縦向き固定の場合
付属のラバーシートを使用せず、1/4-20ネジ1本で固定します。 側面連結はM5ボルト1本で可能です。
スペーサーを挿入することで、隣接するグリップ同士の干渉を防げます。 下部ベースは雨水が溜まりにくい排水構造を採用し、清掃しやすい設計になっています。 Two Editions. Two Purposes. 2つのエディション、それぞれの役割。 This product is available in two material editions, designed for different production environments. Choose the edition that best matches your shooting style and working conditions. 本製品は、撮影環境に応じて選べる2つの素材エディションをご用意しています。 ご自身の撮影スタイルや使用環境に合わせてお選びください。 ◾️Studio（ Indoor Edition） – PETG スタジオ（インドアエディション） – PETG For visual-focused indoor setups.
 見た目と扱いやすさを重視した屋内向けモデル Designed for studio and indoor production environments. • Excellent impact resistance for everyday use
 • Lightweight and easy to handle
 • Refined, metal-like appearance for a clean, professional look 
• Ideal for controlled environments such as studios Best suited for indoor use.
Please avoid prolonged exposure to high temperatures or direct sunlight. A balance of durability and premium aesthetics. スタジオや屋内撮影環境向けに設計。 ・日常使用に十分な耐衝撃性
・軽量で扱いやすい
 ・金属のような質感を持つ洗練された外観
 ・スタジオなど管理された環境に最適 屋内使用を前提とした設計です。
高温環境や直射日光下での長時間使用はお避けください。 耐久性と美しい外観のバランスモデル。 ◾️Pro（Outdoor Edition） – ASA プロ（アウトドアエディション） – ASA For demanding environments and outdoor production.
 過酷な環境や屋外撮影に対応するプロ仕様モデル Engineered for outdoor production and high-temperature environments. • Superior heat resistance 
• Excellent weather durability
 • More resilient under harsh conditions 
• Built for professional field use Designed to perform where reliability matters most. 屋外撮影や高温環境を想定した設計。 ・優れた耐熱性
・高い耐候性
 ・過酷な環境下でも安定した性能 
・現場重視のプロフェッショナル仕様 信頼性が求められる環境で力を発揮します。 ● Package Contents ● 同梱内容 Super clamps are NOT included. • 3 × Upper “Grip” (for approx. 32–36mm pole)
 • 3× Lower “Base”
 • 1 × Screw & Bolt Pack 
  – (x2) Stainless steel 1/4-20 screws
   – (x4) Stainless steel M5 × 15mm bolts
 • 2 × Rubber-like sheets • 1 × Spacer pack “C” for BUD-2 ※スーパークランプは付属しません。 ・上部「グリップ」×3（対応径 約32–36mm） 
・下部「ベース」×13 ・ネジ・ボルトセット ×1
  – ステンレス 1/4-20 ネジ ×2
  – ステンレス M5 ×15mm ボルト ×4
 ・ラバーシート ×2 ・BUD-2 用スペーサーパック “C” ×1

●Package contents (The first photo shows the included items.) An adapter set for easily attaching a Boom or Umbrella to the INOVATIV Voyager Evo, SHAPE WAGON, or Tilta Boulder 36" Camera Cart. When installing the adapter together with the BUD-1, please remove the rubber-like sheet before mounting. For heavier loads, it is recommended to add an additional 1/4-20 bolt and tighten securely. • (x2) MINI INOVATIV adapter 2 for BUD-2

●Package contents (The first photo shows the included items.) An adapter set for easily attaching a Boom or Umbrella to the INOVATIV Voyager Evo, SHAPE WAGON, or Tilta Boulder 36" Camera Cart. When installing the adapter together with the BUD-1, please remove the rubber-like sheet before mounting. For heavier loads, it is recommended to add an additional 1/4-20 bolt and tighten securely. • (x2) INOVATIV adapters for BUD-2

●Package contents (The first photo is the content) An adapter for easily attaching a boom and a light stand to Olympia carts To install the adapter and BUD-1 or LSD-1, you will need to remove the rubber-like sheet. Fix with M5 bolts and M5 nuts to connect the adapter. Designed wedges to allow you to adjust the mounting angle. The dock is designed to attach horizontally to the vertical edge of a cart. However, carts vary in manufacturing precision, and some may not be vertical. Added three wedges of different angles so you can adjust the mounting position to your cart. (x1) Olympia upper adapter / two mounting screw Can be fixed to 3.5mm thick edges (x1) Olympia bottom adapter / two mounting screw Can be fixed to 3.5mm thick edges (x4) M5 bolts (x4) M5 nuts (x1) Wedge spacer set

●Package contents (The first photo is the content) An adapter for easily attaching a boom and a light stand to Olympia carts To install the adapter and BUD-1 or LSD-1, you will need to remove the non-slip rubber-like sheet. Fix with M5 bolts and M5 nuts to connect the adapter. (x2) Olympia adapter / Two mounting screw (x2) M5 bolts 25mm (x1) 1/4" bolts 25mm (x2) M5 bolts 15mm (x1) 1/4" bolts 16mm (x2) M5 nuts (x1) 1/4" nuts (x1) Wedge spacer set

●Package contents (The first photo is the content) An adapter for easily attaching a boom and a light stand to Olympia carts To install the adapter and BUD-1 or LSD-1, you will need to remove the non-slip rubber-like sheet. Fix with M5 bolts and M5 nuts to connect the adapter. Designed wedges to allow you to adjust the mounting angle. The dock is designed to attach horizontally to the vertical edge of a cart. However, carts vary in manufacturing precision, and some may not be vertical. Added three wedges of different angles so you can adjust the mounting position to your cart. (x1) Olympia upper adapter / One mounting screw Can be fixed to 3.5mm thick edges (x1) Olympia bottom adapter / One mounting screw Can be fixed to 3.5mm thick edges (x4) M5 bolts (x4) M5 nuts (x1) Wedge spacer set

Improved Structure from BUD-1 BUD-1からさらに進化 EN Compared to the previous BUD-1 model, the locking section has been structurally reinforced for increased strength and stability. The locking mechanism has also been redesigned for smoother and easier release during operation. Built stronger. Operates smoother. JP 従来モデルBUD-1と比較し、ロック部の構造を全体的に強化。 より高い強度と安定性を実現しました。 さらに、ロック解除もよりスムーズに行える設計へと改良しています。 より強く、よりスムーズに。 ● Precautions Before Purchasing ● ご購入前の注意事項 EN This product is made from 3D-printed resin, not metal.
If you are expecting metal-like strength, rigidity, or surface finish, please refrain from purchasing. Due to the nature of 3D printing, minor layer lines, small surface marks, or slight burrs may be visible.
Unlike injection-molded products, 3D-printed items may not have a perfectly smooth or uniform finish. The product has been tested and verified for normal professional use. However, please avoid excessive loads, strong impacts, or improper handling. Please purchase only if you understand and accept the characteristics of 3D-printed and handmade products. JP 本製品は金属製ではなく、3Dプリント樹脂製です。
金属のような強度・剛性・仕上がりを期待される方はご購入をお控えください。 3Dプリント製品の特性上、積層痕・細かな表面傷・わずかなバリが見られる場合があります。
射出成形品のような完全に滑らかで均一な仕上がりではありません。 通常の撮影用途での強度確認は行っておりますが、過度な荷重や強い衝撃、不適切な使用はお避けください。 3Dプリント製品およびハンドメイド製品の特性をご理解いただける方のみご購入をお願いいたします。 ● Product Description ● 商品説明 EN This boom & umbrella dock is designed to be mounted using a super clamp. Multiple units can be connected side-by-side, allowing efficient parallel mounting of multiple booms. The super clamp can be mounted both horizontally and vertically. • Horizontal mounting:
Secure using the included rubber-like sheet, two M5 bolts, and one 1/4-20 screw. • Vertical mounting:
Secure using one 1/4-20 screw without the included rubber-like sheet. Side expansion is possible using one M5 bolt.
By inserting a spacer, interference between adjacent grips can be prevented. The lower base features a drainage-friendly structure that helps prevent rainwater accumulation and allows for easy cleaning. JP 本製品はスーパークランプで固定できるブーム＆アンブレラドックです。 複数個を側面連結することで、ブームを横並びに効率よく設置できます。 スーパークランプは横向き・縦向きの両方に対応しています。 • 横向き固定の場合
付属のラバーシート、M5ボルト2本、1/4-20ネジ1本で固定します。 • 縦向き固定の場合
付属のラバーシートを使用せず、1/4-20ネジ1本で固定します。 側面連結はM5ボルト1本で可能です。
スペーサーを挿入することで、隣接するグリップ同士の干渉を防げます。 下部ベースは雨水が溜まりにくい排水構造を採用し、清掃しやすい設計になっています。 Two Editions. Two Purposes. 2つのエディション、それぞれの役割。 EN This product is available in two material editions, designed for different production environments. Choose the edition that best matches your shooting style and working conditions. JP 本製品は、撮影環境に応じて選べる2つの素材エディションをご用意しています。 ご自身の撮影スタイルや使用環境に合わせてお選びください。 ◾️Studio（ Indoor Edition） – PETG スタジオ（インドアエディション） – PETG For visual-focused indoor setups.
 見た目と扱いやすさを重視した屋内向けモデル EN Designed for studio and indoor production environments. • Excellent impact resistance for everyday use
 • Lightweight and easy to handle
 • Refined, metal-like appearance for a clean, professional look 
• Ideal for controlled environments such as studios Best suited for indoor use.
Please avoid prolonged exposure to high temperatures or direct sunlight. A balance of durability and premium aesthetics. JP スタジオや屋内撮影環境向けに設計。 ・日常使用に十分な耐衝撃性
・軽量で扱いやすい
 ・金属のような質感を持つ洗練された外観
 ・スタジオなど管理された環境に最適 屋内使用を前提とした設計です。
高温環境や直射日光下での長時間使用はお避けください。 耐久性と美しい外観のバランスモデル。 ◾️Pro（Outdoor Edition） – ASA プロ（アウトドアエディション） – ASA For demanding environments and outdoor production.
 過酷な環境や屋外撮影に対応するプロ仕様モデル EN Engineered for outdoor production and high-temperature environments. • Superior heat resistance 
• Excellent weather durability
 • More resilient under harsh conditions 
• Built for professional field use Designed to perform where reliability matters most. JP 屋外撮影や高温環境を想定した設計。 ・優れた耐熱性
・高い耐候性
 ・過酷な環境下でも安定した性能 
・現場重視のプロフェッショナル仕様 信頼性が求められる環境で力を発揮します。 ● Package Contents ● 同梱内容 EN Super clamps are NOT included. • 1 × Frame for Boom & Umbrella Dock 2 JP ※スーパークランプは付属しません。 ・上部「グリップ」のBoom & Umbrella Dock 2　のフレームのみ

Please choose your preferred color from the options below: • Orange (ASA) • Magenta (ASA) • Red (ASA) • Purple (ABS) Material type varies depending on color.

Please select one of the four grips below with the corresponding diameter. ①Approximately 22-25mm ②Approximately 28-32mm ③Approximately 32-36mm ④Approximately 38-42mm

● Precautions Before Purchasing ● ご購入前の注意事項 EN This product is made from 3D-printed resin, not metal. If you are expecting metal-like strength, rigidity, or surface finish, please refrain from purchasing. Due to the nature of 3D printing, minor layer lines, small surface marks, or slight burrs may be visible. Unlike injection-molded products, 3D-printed items may not have a perfectly smooth or uniform finish. The product has been tested and verified for normal professional use. However, please avoid excessive loads, strong impacts, or improper handling. Please purchase only if you understand and accept the characteristics of 3D-printed and handmade products. JP 本製品は金属製ではなく、3Dプリント樹脂製です。 金属のような強度・剛性・仕上がりを期待される方はご購入をお控えください。 3Dプリント製品の特性上、積層痕・細かな表面傷・わずかなバリが見られる場合があります。 射出成形品のような完全に滑らかで均一な仕上がりではありません。 通常の撮影用途での強度確認は行っておりますが、過度な荷重や強い衝撃、不適切な使用はお避けください。 3Dプリント製品およびハンドメイド製品の特性をご理解いただける方のみご購入をお願いいたします。 ● Product Description ● 商品説明 EN A carabiner-shaped wedge designed for professional film and photo production. This versatile tool helps eliminate wobble and stabilize equipment such as apple boxes, hi-hats, tripods, carts, and other on-set gear. The integrated carabiner-style design allows you to easily hook it onto carts, stands, or belts for quick access during fast-paced shoots. Lightweight yet durable, it’s built to handle everyday professional use on set. Small tool. Big difference. JP 撮影現場のために設計された、カラビナ形状のくさびです。 アップルボックス、ハイハット、三脚、カートなどのガタつきを抑え、機材の安定性を向上させます。 カラビナ形状により、カートやスタンド、ベルトなどに素早く引っ掛けることができ、現場での素早いアクセスが可能です。 軽量ながらプロユースに耐える強度を確保しています。 小さなツールが、大きな違いを生みます。 ●Dimensions 　Approx.　150mm x 30mm x16mm ●Package contents (The first photo is the content) (x4) Carabiner Wedges

● Precautions before purchasing This product is made from 3D-printed resin, not metal. If you are expecting metal-like strength or finish, please refrain from purchasing. Due to the nature of 3D printing, layer lines, minor surface marks, or small burrs may be present. Fine scratches may also occur during the manufacturing process. Compared to injection-molded resin products, 3D-printed items generally have a more handcrafted appearance. The strength of this product has been tested and confirmed for normal use. However, please avoid excessive force, impact, or improper use, as this may cause damage. We kindly ask that only customers who understand and accept the characteristics of 3D-printed and handmade products place an order. ● Product explanation This compact trash can can be mounted to a V-lock just like a V-mount battery. Since the V-lock system is widely used in camera and lighting equipment, it can be attached in many different places on set. The V-lock mount allows for quick and easy attachment and removal, making trash disposal fast and hassle-free during shoots. https://www.instagram.com/reel/DUDZwL3Eug-/?igsh=dnA5bWx1b3dzZHU5 We have confirmed the installation with many V-mounts, but there may be some wobbling depending on the receiving side of the V-lock. Checked V-mount list ・SmallRig Mini V-Lock Assembly Kit MD2801B ・SmallRig Mini V Mount Battery Plate 2987 ●Dimensions 　Approx.　100mm x 85mm x 140mm ●Package contents (The first photo is the content) V-lock Trash Can

● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation It allows you to attach the V-Lock Base and Cheese Plate to your ROBOCUP. https://www.instagram.com/reel/DSUrkspkuCY/?igsh=MTRyaXp3YjN0dmEycg== Products that have been confirmed for installation ・SmallRig Mini V-Lock Assembly Kit MD2801B ・SmallRig Mini V Mount Battery Plate 2987 ・SmallRig Mounting Cheese Plate 1598 ●Package contents (The first photo is the content) 1 - Camera Screw Mount Holder for ROBOCUP 2 - Velcro for fixing　

● ご購入前の注意事項 本製品は3Dプリント樹脂製であり、金属ではありません。金属のような強度を期待される方はご購入をお控えください。 3Dプリント製品には、積層痕やバリ、製造工程で発生する微細な傷などが生じる場合があります。通常、3Dプリント製品は、型で製造された樹脂製品のようにきれいな仕上がりになることは稀です。製品の強度は通常使用において確認しておりますが、過度の負担をかけるような使用や加工はしないでください。 上記の通り、3Dプリント製品、またはハンドメイド製品であることをご理解いただける方のみご注文ください。 ● 商品説明 「ビオレu 薬用手指の消毒液」を ROBOCUPに固定できるホルダーです。 ●パッケージ内容（写真1枚目が内容物です） ・消毒液ホルダー for ROBOCUP ・固定用マジックテープ　２本

A chocolate textured accessory box for drinks and smartphones. Can be attached with super clamps or innovative adapters. https://www.instagram.com/reel/C-kGcFQvgJx/?igsh=MTZmeHE0YW42aWc4dQ== https://www.instagram.com/reel/C-M7NLWPDBy/?igsh=M3N3cHB2NXcyNTVi (x1)Mini Chocolate Front Box (x2) adapter for super clamps (x2)M5 bolts

● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation This is a dock for Magliner that can hold an Velbon Dolly Pod. You can also take it apart, attach the super clamps. Designed it based on the Velbon Dolly Pod DP-83S that is mainstream in Japan. [upper “grip” ] 28-32mm grip for Velbon Dolly Pod DP-83S [lower “base”] base for Velbon Dolly Pod DP-83S It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Dolly Pod to the base:) The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE. ●Package contents (The first photo is the content) ＊ Super clamps are not included 1 - DPD-1 This grip can hold stands with a diameter of approximately 28-32mm. (x1)- upper “grip” with black clamp and orange safety lock This grip can hold stands with a diameter of approximately 28-32mm. (x1)- lower “base” for Velbon Dolly Pod The lower “base” for securing the pod (x1)- Mini lower “base” for Velbon Dolly Pod The lower “base” for securing the pod to the handle side of the Magliner 　　＊This is designed to mount to the side of the handle on older-generation Magliners using the Mini Magliner Adapter, rather than the current Magliner model. 1-Mini Magliner adapter for DPD-1 (x2) Magliner adapter (x4) M5 bolts (x1) 1/4inch bolt for bottom 2 - screw and bolt pack (x2) stainless steel 1/4-20 screws (x4) stainless steel M5-15mm bolts 2 - Rubber-like spacer with 3 holes

● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation This is a dock for Olympia carts that can hold an Velbon Dolly Pod. https://www.instagram.com/reel/DNaik4Qvgkp/?igsh=MWJtam91aGwycjZzNw== https://www.instagram.com/reel/DPv4vQgEm8d/?igsh=bjkyNHo1cXZlMGt2 You can also take it apart, attach the super clamps. Designed it based on the Velbon Dolly Pod DP-83S that is mainstream in Japan. It is recommended that the base of the bottom should be tightened with three screws(one 1/4 inch screw and two M5 bolts). Do not fix it with only one or two screws and bolts. Because it is made of resin, if you repeat the removal and removal, it may be shaved little by little. Let's carefully attach the Dolly Pod to the base:) The whole material uses weather resistance and durable ASA, and the grip uses high-quality and durable TPE. ●Package contents (The first photo is the content) ＊ Super clamps are not included 1 - Dolly Pod Dock（DPD-1） This grip can hold stands with a diameter of approximately 28-32mm. [upper “grip” & extension parts ] 28-32mm grip for Velbon Dolly Pod DP-83S [lower “base”] base for Velbon Dolly Pod DP-83S 1 - screw and bolt pack (x2) stainless steel 1/4-20 screws (x4) stainless steel M5-15mm bolts 2 - Rubber-like spacer with 3 holes 1 - Olympia adapter for DPD-1 / Two mounting screws Can be fixed to 3.5mm thick edges (x1) upper Olympia adapter with two mounting screws (x1) long Olympia adapter with two mounting screws (This allows you to adjust the mounting height.) (x4) stainless steel M5-25mm bolts (x1) stainless steel 1/4"-25mm bolts (x2) stainless steel M5-15mm bolts (x1) stainless steel 1/4"-16mm bolts (x4) stainless steel M5 nuts (x1) stainless steel 1/4" nuts

● Precautions before purchasing This product is made of 3D -printed resin, not metal. If you are expecting a metal -like strength, please refrain from purchasing. 3D -printed ones have laminated marks and burrs, and may cause thin scratches in the manufacturing process. Normally, 3D -printed products are less likely to be cleaner like a resin product made in the mold. The strength of the product has been confirmed in normal use, but do not use or make a mistake in the extreme burden. Only those who understand the 3D -printed products or handmade products as described above should order. ● Product explanation This is a boom & umbrella dock that can be attached to an Olympia cart. Also, it is a boom & umbrella dock that can be fixed with a super clamp. It is possible to connect to the side and install booms side by side. https://www.instagram.com/reel/DM2dwQSPaZw/?igsh=eGd4ZHF2bnY1YWR1 https://www.instagram.com/reel/DM5EPX4vWeB/?igsh=enZjMG0weWxxanFx Super clamps can be fixed not only in the horizontal but also vertically. If you fix it horizontal, you can fix it with two M5 bolts and one 1/4 inch screw. If you fix it vertically, remove the non -slip rubber like sheet and you can fix it with one 1/4 inch screw. https://www.instagram.com/reel/C94U2EevdWI/?igsh=MWQ0bG9jNTlidHpzYw== The lower base part has a structure that does not accumulate water such as rain, making it easy to clean. The whole material uses weather resistance and durable ASA, and the grip uses high -quality and durable TPE. It is currently difficult to obtain ASA materials in a stable manner, and since the filament manufacturers available vary depending on the production period, the way black materials look slightly different. ●Package contents (The first photo is the content) ＊ Super clamps are not included 1 - upper “grip” with black clamp and orange safety lock This grip can hold stands with a diameter of approximately 32-36mm. 1 - lower “base” 2 - Rubber-like spacer with 3 holes 1 - screw and bolt pack (x2) stainless steel 1/4-20 screws, (x4) stainless steel M5-15mm bolts 1 - Olympia adapter for BUD-1 & LSD-1 / Two mounting screws Can be fixed to 3.5mm thick edges (x1) Olympia upper adapter with two mounting screws (x1) Olympia bottom adapter with two mounting screws (x4) stainless steel M5-25mm bolts (x4) stainless steel M5 nuts (x1) Wedge spacer set